How To Replace a Capacitor on a Swamp Cooler Motor

By | February 29, 2024

How To Replace a Capacitor on a Swamp Cooler Motor
Replacing a capacitor on a swamp cooler motor fall in the DIY category and is a straightforward fix.

Of course, if in doubt, be sure to call a professional.

Not all evaporative coolers use capacitors, and it can vary from unit-to-unit if one is installed.

If cooler does have one and the motor has been replaced, the capacitor should always also be replaced.

A capacitor is a low-cost item that can cause problems for a new motor, and it is recommended to always replace the capacitor when a new motor is installed.

What is a Swamp Cooler Motor Capacitor?

A swamp cooler motor capacitor helps to regulate the flow of electricity to the motor with no heavy up and down spikes.

This can help to extend the life of the motor and keep it running at a steady rotation.

Some capacitors are called a RUN capacitor, which helps a motor to start.
How To Replace a Capacitor on a Swamp Cooler Motor Test
Testing it can be done with the correct multi-meter, which can test Micro Farads.

Many swamp coolers do not use a capacitor with it, depending on the manufacturer if one is installed or not.

How To Buy a Swamp Cooler Motor Capacitor

The capacitor voltage and amps need to match the blower motor with both having a face-plate for the voltage and amps.

Capacitors are measured in voltage and uf (micro-farads). To find a replacement, look at the capacitor and write down the voltage and the uf (micro-farads) and then order a replacement.
20140314_120415
A capacitor’s shape can be oval or round, which only matters when installing it. Often rounds are used to replace oval capacitors if that is all that’s available.

The tag on the motor will also show the horsepower, RPM, Voltage, and amps.
20140314_123512
The voltage and amps on the motor will match the capacitor.

Steps To Replace a Capacitor on a Swamp Cooler Motor

  1. Turn off all power to the unit and unplug it.
  2. Locate the capacitor and discharge any voltage it may hold by jumpering the legs together.
  3. How To Replace a Capacitor on a Swamp Cooler Motor Step 2

  4. Remove the wires.
  5. How To Replace a Capacitor on a Swamp Cooler Motor Step 3

  6. Remove the screws holding it in place.
  7. How To Replace a Capacitor on a Swamp Cooler Motor Step 4

  8. Connect the wires to the new capacitor.
  9. How To Replace a Capacitor on a Swamp Cooler Motor Step 5

  10. Reattach the screws that hold the capacitor in place.
  11. How To Replace a Capacitor on a Swamp Cooler Motor

  12. Test the unit which should now work.

Summery
Replacing a capacitor on an evaporative cooler can be done by the handy homeowner who has some electrical experience.

If you work on the unit, be sure the power is turned off and unplugged from the cooler.

Capacitors have only two legs and two wires which make them easy to replace.

Be sure to order the correct capacitors for your cooler as there are many, and it must match the cooler’s motor.

Have you replaced a capacitor on a swamp cooler? Let us know your thoughts below.

Category: swamp evaporative cooler

About Aaron H. Benetti

Aaron H. Benetti an HVAC technician who has worked in the field since 1991. He began his career as an HVAC installer and later began doing troubleshooting and repairs. Around 2010, he began to write books on HVAC topics, mainly tutorials and how-to information. Currently, Aaron works as an HVAC tech and also writes many articles and posts for websites as well as books and videos on HVAC topics.

2 thoughts on “How To Replace a Capacitor on a Swamp Cooler Motor

  1. Robert Welch

    Would like to know if a run capacitor can be installed on a swamp cooler motor that has none, to help it run smoother, does anyone make a kit for this

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.